Please ensure that your computer has the .Net
Framework installed, as it is necessary for
the Commander Update program to function properly.
If your computer does not have the .Net Framework
installed you must download it before proceeding
with the Commander Update.
Documentation:
Coming Soon
Pulse CM
Firmware Updates:
File Name: 2006-2007 Pulse Ver 1.3.8.0
UPDATED: 06/05/2009
Models: PCM1006
Software Version: 050209
Feature Code Enabled: N/A
Features:
Custom tuning power level range has been increased to 4-14
Custom tuning parameter are now properly recalled after power cycle
Default stock tire size has been corrected
Flashing Pop Up Window for Warm Up mode has been removed and replaced with a "W" in the Power Level indicator window
File Name: Pre-Installer
UPDATED: 11/24/2008
Features:
If you are receiving Pulse or Commander Module not found error then download and run this file as it will reload the necessary drivers onto your computer.
Note: This is a silent install and once you run it from your computer you will not see anything happen but, you will be able to update your Pulse module.
1.) Download this zip file to your computer
2.) Extract the files from the zip file
3.) Run the PreInstaller.exe
File Name: USB Updater
UPDATED: 11/24/2008
Features:
You must run the Pre-Installer first for this update to work
Updates the USB to allow users to download Pulse Updates
1.) Run the Pre-Installer software located below
2.) Connect Pulse to your PC
3.) Click "Update USB Now"
4.) Disconnect Pulse and Close USB Updater
5.) Open Pulse update and follow on screen instructions.
If this update does not work please send an email to jmccann@quadzillapower.com and let him know what it is doing
Updating your PulseCm Module is easy,
simply download the Tuning File Update and follow these steps*
1
Save the Tuning File Update to your computer.
2
Run the Update Application.
3
Connect your USB cable to the PulseCm Module.
4
Click on 'Update Module' and follow the on screen tutorial.
